From 930f417a9f6bd3b0e8640ba9ce6f1e895ff68303 Mon Sep 17 00:00:00 2001
From: Tom Staubitz <thomas.staubitz@hpi.uni-potsdam.de>
Date: Fri, 30 Dec 2016 09:48:21 +0100
Subject: [PATCH] Added setup instructions for adding a host-only network
 adapter. This is required so that codeocean on the VM can connect back to
 openHPI on the host machine.

---
 debian_installer/setup_debian_vm.sh | 57 ++++++++++++++++++++++++++++-
 1 file changed, 56 insertions(+), 1 deletion(-)

diff --git a/debian_installer/setup_debian_vm.sh b/debian_installer/setup_debian_vm.sh
index 1fdb628a..a06c7484 100644
--- a/debian_installer/setup_debian_vm.sh
+++ b/debian_installer/setup_debian_vm.sh
@@ -78,12 +78,67 @@ debian_installer/setup_debian_7_create_tables.sh
 # Protocol TCP Host port 3030, guest port 3000, name CodeOcean, other left blank.
 # That's all! 
 # Start Puma server on VM
-# rails s -p 3000 
+# rails s -p 8080 
 
 # To connect to Ruby app use 
 #http://127.0.0.1:3030
 
 
+#The following is required so that CodeOcean can connect back to openHPI local
+
+# Setup a second networking interface
+# 1. Host-only vboxnet0 (ip-address: 192.168.59.104)   
+# 2. NAT with all the portforwarding stuff as described above
+
+# Edit /etc/network/interfaces in Guest machine:
+# 1. check for available interfaces:
+# ls /sys/class/net   ===>    docker0  eth0  eth1  lo
+
+# 2. edit network configuration:
+# sudoedit /etc/network/interfaces
+# and add the following lines:
+ 
+# This file describes the network interfaces available on your system
+# and how to activate them. For more information, see interfaces(5).
+
+source /etc/network/interfaces.d/*
+
+# The loopback network interface
+auto lo
+iface lo inet loopback
+
+# The primary network interface
+# allow-hotplug eth0
+# iface eth0 inet dhcp
+
+#Host-only interface
+auto eth0
+iface eth0 inet static
+        address         192.168.59.104
+        netmask         255.255.255.0
+        network         192.168.59.0
+        broadcast       192.168.59.255
+
+#NAT interface
+auto eth1
+iface eth1 inet dhcp
+
+# See also: 
+# http://askubuntu.com/questions/293816/in-virtualbox-how-do-i-set-up-host-only-virtual-machines-that-can-access-the-in
+
+# !!!!!Attention!!!!!!!!
+# Start openHPI Local as:
+# http://{host.ip}:3000/
+# e.g. http://192.168.178.33:3000/
+# set LTI Provider in course as:
+# http://192.168.59.104:3030/lti/launch
+
+# Access VBox with static IP and port-forwarding
+# SSH:
+# ssh -p 3022 debian@192.168.59.104
+# CodeOcean:
+# http://192.168.59.104:3030
+
 #TODO production: 
 # require passwd for sudo again.
 # cd /etc/sudoers.d